Dri-Eaz Milgo SR

This powerful deodorizer knocks out the toughest mold, sewage and other water damage odors as well as urine, feces, perspiration and decay. Works in porous materials such as carpet, pad, subfloors, drywall, upholstery and laundry, and can also be used on nonporous materials such as floors and walls. Milgo SR is the best choice for deodorizing stain resistant carpets, and can be used as an additive in carpet and upholstery cleaning solutions to leave your customers' homes smelling clean and fresh.

ITEMS NEEDED
• Odor Control products: Milgo SR
• Cleaning products: Milgo Plus*
, carpet cleaning detergents such as Dyna Force 77, Fission Traffic Lane Cleaner and Optimal
Rinse
• Personal protective equipment (PPE) as specified in the Safety Data Sheet (SDS)
• Supplies: adequate supply of clean cloths and a plastic bag for the storage of soiled cloths, measuring cup, paint roller, carpet
brush
• Equipment: carpet extractor, electric or pressure sprayer with 8002 jet, air movers or dehumidifiers
PRETESTING
Apply a small amount of ready to use solution on an unobtrusive area to check for compatibility before proceeding. Look for signs of
incompatibility such as discoloration or distortion of the surface. Check each surface that you will treat with the product.
DIRECTIONS FOR CARPET CARE
Prepare ready to use (RTU) solution: Mix 16 ounces Milgo SR with enough water to make 1 gallon (125 mL/L). Prepare RTU
solutions BEFORE entering the worksite.
• Carpets: Apply RTU directly to carpet with sprayer. Roll or brush into the fabric. Allow 10 minute dwell time and follow with an
extraction cleaning process.
• Urine odors: Saturate all affected areas with RTU solution before cleaning and extraction. Mist RTU solution after cleaning, then
speed dry affected materials after treatment.
• Water damage from sanitary source: Saturate all affected porous materials with RTU solution. Allow at least 10 minute contact
time.